Price a metal roof for your home. Pick a panel type to see the true roof area, squares and an installed cost range.
Installed rates include panels, fasteners, underlayment and labour. Results are ranges for planning only. Get a written quote from a licensed local contractor for a firm price.
True roof area = footprint length x footprint width x pitch multiplier. Material area = true roof area plus your waste allowance. Total cost = material area times the installed rate for your panel type.
The calculator adds the waste allowance before pricing, because you pay for the panels you order, including offcuts. Installed rates include panels, fasteners, underlayment and labour.
Screw-down corrugated lasts 20 to 30 years. It is the cheapest metal roof, but the exposed screws need checking over time as washers wear.
Standing seam lasts 40 to 70 years. The fasteners are hidden under the seams, so there are fewer leak points. It costs the most upfront and lasts the longest.
Metal shingles last 30 to 50 years. They look like slate or wood shake and suit homes where long panels would look out of place.
A 40 ft by 30 ft footprint with a 6/12 pitch, standing seam panels and a 10% waste allowance.
A standing seam roof at this size should last 40 to 70 years, so the higher upfront cost buys two to three times the life of an asphalt shingle roof.
Standing seam lasts 40 to 70 years. Metal shingles last 30 to 50 years. Screw-down corrugated lasts 20 to 30 years. All three outlast asphalt shingles.
Not with proper underlayment and attic insulation. Most homeowners hear no more noise than with shingles.
No. Metal roofing does not attract lightning. It is non-combustible, so it is safer than wood shake in a strike.
Often yes, one layer, if local code allows it. It saves tear-off cost but hides the decking, so a roofer should check the deck first.
If you plan to stay in the home for decades, yes. Hidden fasteners mean fewer leak points and the roof can last 40 to 70 years.
Metal roofing is a pro job. Panels are long and awkward. A bad seam leaks. Standing seam needs special tools to crimp the seams. Get three quotes and ask about the gauge and coating in each one.
Sources: cost ranges checked against Angi, HomeAdvisor and Fixr, plus material prices from Home Depot and Lowe's. Prices last reviewed: 21 November 2026.