Work out exactly how many shingle bundles, underlayment rolls, ridge caps, starter strips and nails your roof needs.
Counts are rounded up to whole bundles, rolls and boxes, because roofing material is not sold in fractions.
True roof area = footprint length x footprint width x pitch multiplier. Material area = true roof area plus your waste allowance. Squares = material area / 100.
Assumptions used on this page:
Some roofers run starter strip along the rakes as well as the eaves. This calculator counts eaves only, so add extra starter bundles if your roofer starts the rakes too.
A 40 ft by 30 ft footprint with a 6/12 pitch, architectural shingles, a 10% waste allowance, a 40 ft ridge and synthetic underlayment.
Three bundles make one square. A bundle covers about 33.3 sq ft, so three bundles cover 100 sq ft.
Use 10% for a simple gable roof and 15% for a roof with many valleys, hips or dormers. Cut-up roofs waste more material.
Synthetic is lighter, stronger and covers more squares per roll, so you buy fewer rolls. Felt is cheaper per roll but heavier and tears more easily.
Yes, along the eaves. Starter strips seal the first course of shingles and stop wind from lifting the edges.
Four nails per shingle is standard. High-wind areas use six nails per shingle, so buy extra nails if your area needs six.
Yes, 3-tab shingles can be cut into cap pieces. Ready-made cap bundles are faster to install and give a cleaner ridge.
Counting material is a good DIY step before you call a roofer. Installing shingles yourself is possible on a low, simple roof if you are comfortable at height, but most homeowners hire a pro for the install and use this list to check the quote.
Sources: material coverage checked against Angi, HomeAdvisor and Fixr, plus material prices from Home Depot and Lowe's. Prices last reviewed: 21 November 2026.